Hudson

Solid maple doors and drawer fronts
Full ½” plywood side and back panels
¾” solid wood corner blocks
¾” bullnosed adjustable plywood shelves
Dovetail drawer construction
Full-extension undermount drawer glides
Hidden, six-way adjustable hinges with soft-close mechanism
Plywood hanging rails top and bottom

WOLF Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without cams, brackets, or clips. All drawer boxes are dovetailed for strength at no additional charge. In addition, our finishes are machine-applied using the latest technology to ensure a smooth, even look. Corrugated packaging is securely strapped, fully encasing your product and assuring safe arrival without damage.

Base Cabinets
- Cabinet fronts are made from ¾” solid maple wood. Front stiles are pocket drilled and assembled with 1¼” screws for rugged durability. Bottoms are ½” solid maple wood.
- Side panels – ½” plywood with matching exterior laminate – glued and stapled in a ½” dado in the cabinet’s front frame.
- Back panels – made from vinyl covered (inside only) ½” plywood – are glued and nailed in a ½” dado and stapled to the hang rail and cabinet bottom.
- All wood ¾” corner blocks are installed on all corners.
- Half-depth adjustable shelf of ¾” plywood with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.
- All drawers are constructed using ⅝” clear finished solid wood with dovetail construction. Drawer bottom is ¼” plywood in a dado into drawer sides.
- All cabinet front and door surfaces receive stain or paint and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.

Finish, drawers & Hinges
- Saginaw: Side mount, standard epoxy glides
Dartmouth & Hudson: Full extension, under mount glides with soft-close - Saginaw: Hidden, six-way adjustable hinge
Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism. All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet). Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door then screw to other side. - Adjustable ¾” plywood shelf with bull nosed, foil covered front edges. The shelves are held in placewith self-locking clips on the sides.

Wall Cabinets
- Cabinet fronts are made from ¾” solid wood. Front stiles are pocket drilled and assembled with 1¼”screws for rugged durability. Tops are ½” solid maple wood.
- Side panels – ½” plywood with matching exterior laminate – glued and stapled in a ½” dado in the cabinet’s front frame.
- Back panels – made from vinyl covered (inside only) ½” plywood – are glued and nailed in a ½” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
- Adjustable ¾” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.